75
EN
EN
Recording
Playback
Basic Setup
Connections
Editing
Introduction
Function Setup
Others
Español
SPECIAL PLAYBACK
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press
[RETURN]
repeatedly
at step 3.
• To cancel the zoom function, select “x1.0” using
[
K
/
L
]
, then press
[OK]
at step 3.
• When you zoom a picture during a slide show, the
slide show will be put in the pause mode. Press
[PLAY
B
]
to resume the slide show and the zoom
function will be turned off.
1) During playback, press [DISPLAY].
2) Use [
{
/
{ B
] to select
menu.
e.g.) DVD-video
1/ 5
1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [
K
/
L
] to select a desired zoom factor to zoom,
then press [OK].
1/ 5
1/ 5
DVD
× 1.2
× 1.5
× 2.0
0:01:00 / 1:23:45
Video
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
Zoom area will be displayed.
4) Use [
K
/
L
/
{
/
{ B
] to select a desired zoom position,
then press [OK].
Zoom playback will start.
This feature allows you to assign a specific point on a title
to be called back later.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [
{
/
{ B
] to select
to display the marker list.
e.g.) DVD-video
1/ 5
1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [
K
/
L
] to select a desired marker number.
When it reaches the desired point, press [OK].
1/ 5
1/ 5
DVD
---
---
---
---
---
---
1
2
3
4
5
6
0:01:00 / 1:23:45
Video
4) To return to the marker later:
Use [
K
/
L
] to select the desired marker number,
then press [OK].
Note
• To clear a marker, select the marker number to be
cleared, then press
[CLEAR]
.
• All markers will be erased when you operate these
operations listed below.
– opening the disc tray (DVD/CD only)
– turning the unit to the standby mode (DVD/ CD only)
– make additional recording on the disc (DVD only)
– editing any title (DVD only)
– dividing the title (HDD only)
– deleting a scene of the title (HDD only)
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
Zoom
Marker Setting
E2S02UD̲MDR515H̲F7̲EN̲v1.indd 75
E2S02UD̲MDR515H̲F7̲EN̲v1.indd 75
2010/08/17 9:05:47
2010/08/17 9:05:47
