Magnavox MBP2100, Руководство пользователя

Страница: 45 / 60

45 EN
FUNCTION SETUP
If you select “Manual”, follow the following
instruction to set the IP address and DNS.
3-a) Use [
K
/
L
] to select “IP Address”, “Subnet Mask”
or “Default Gateway”, then press [OK] . IP address
setting screen will appear. Enter IP address,
subnet mask and default gateway with cursor
buttons and number buttons.
• Enter the IP address number after checking the
specifications of your router.
• If the IP address is unknown, check the IP
address of other devices. (e.g. PC connected via
LAN cable) and assign a different number from
those of other devices.
3-b) After you enter all correctly, press [OK] .
• Confirmation message will appear. Select “Yes”
to complete the settings.
3-c) Use [
K
/
L
] to select “Primary DNS” or “Secondary
DNS”, then press [OK] . DNS setting screen will
appear. Enter primary DNS and secondary DNS
with cursor buttons and number buttons.
• Enter the DNS addresses provided by your
Internet provider.
• If the DNS address is unknown, check the DNS
address of other devices (e.g. PC connected via
LAN cable) and assign the same DNS address.
3-d) After you enter all correctly, press [OK] .
• Confirmation message will appear. Select “Yes”
to complete the settings.
4
Press [RETURN] to go back to the previous
screen, or press [SETUP] to exit.
• Proxy Setting
1
Follow steps 1 to 4 in “Connection Test” on
page 44.
2
Use [
K
/
L
] to select “Enable(Custom)”, then
press [OK].
3
Use [
K
/
L
] to select “Proxy Setting”, then
press [OK] repeatedly to select the desired
setting.
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting as instructed
by your Internet service provider to set the designated
proxy address and port, select “Use”.
If you select “Use”, follow the following instructions
to set the proxy address and proxy port.
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
IP Address
Subnet Mask
Default Gateway
then press ‘OK’
Others
IP Address Setting
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
Is Setting OK?
IP Address
Subnet Mask
Default Gateway
No
Yes
Others
IP Address Setting
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
Primary DNS
Secondary DNS
then press ‘OK’
Others
DNS Setting
Note
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number
will automatically be 255.
• The manually entered addresses will be saved even if
you change the setting to “Auto(DHCP)”.
• When you enter a wrong number, press [CLEAR] to
cancel. (The number will be back to “0”.)
• If you want to enter 1 or 2 digit number in one cell,
press [
B
] to move on to the next cell.
• If the entered IP address or the default gateway or
primary DNS addresses is same as the default setting,
IP address setting will be set to “Auto(DHCP)”. (The
manually entered number will be saved.)
• When IP address setting is set to “Manual”, the
setting of DNS setting will automatically be “Manual”
and when IP address setting is set to “Auto(DHCP)”,
you can set either “Auto(DHCP)” or “Manual” for DNS
setting.
xxx . xxx . xxx . xxx
xxx . xxx . xxx . xxx
Is Setting OK?
Primary DNS
Secondary DNS
No
Yes
Others
DNS Setting
INTRODUCTION
CONNECTIONS
PLAYBACK
FUNCTION SETUP
OTHER
S