25
PLAYBACK
This function shuffles the playback order of tracks / files.
1
In stop mode, press [MODE] twice.
2
Press [
(play)] to start random playback.
To exit from the random playback mode:
This function plays back approximately at 1.3 times the
normal playback while keeping the sound output. This
function is available only on discs recorded in the Dolby
Digital format.
1
During playback, press [MODE] repeatedly
until the Rapid playback setting appears.
2
] to switch
(1.3x), or off.
3
Press [
] to return to normal playback.
You can adjust the picture quality.
1
During playback, press [MODE] repeatedly
until
appears.
2
Use [
] to select your desired item, then
] to adjust the setting.
Black level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
Random Playback
:
:
Track information
File information
:
:
“CD-DA” will be displayed.
Current Disc, SD Memory Card, or
folder name will be displayed.
Track / File list : Track / File list in the original order
will be displayed.
Operation
Guide
: Press [RED] to go to the previous
page in the track / file list.
Press [GREEN] to go to the next
page in the track / file list.
Total playback time of all tracks.(audio CD only)
Playback status
• During the random playback, press
to set the resume point, and then press
resume random playback from where
was
pressed (audio CD) or from beginning of the file
where
• To repeat the current track / file in the random
selection, press
repeatedly until
“
Track” appears during playback. To repeat the
entire random selection press
repeatedly
until “
All” appears during playback.
• Playback from a desired track / file is not available
during random playback.
• In stop mode, press
to switch to the
program playback mode.
1 : 13 : 29
CD_DA
1
0:36
1:14
0:45
0:50
0:53
0:20
0:54
2
3
4
5
6
7
- - / 16
1
6
2
3
4
5
Random
Total
Page Down
1
2
3
4
5
6
Rapid Playback
: Plays back in normal speed.
“
”
: Plays back approximately at 1.3 times of normal
playback.
• Picture adjustment and audio language setting
cannot be changed during this function.
• Virtual surround does not work during this function.
• This function may not work at some points on a disc.
• During this function, 2ch LPCM will be output from
HDMI OUT jack and DIGITAL OUT jack.
Adjusting the Picture
: Makes the dark parts brighter.
: Shows the original picture as recorded.
Off
Black Level
Noise Reduction
On
Off
INTRODUCTION
CONNECTIONS
PLA
Y
BA
CK
FUNCTION SETUP
O
THER
S