Canadian
English rating
Canadian
French rating
Description
All
Locked All Ratings
E
Exempt Program
C
–
For All Children
C8+
–
For All Children 8 and Older
G
General Audience
–
8ans+
Unsuitable for Ages under 8
PG
–
Parental Guidance Suggested
–
13ans+
Unsuitable for Ages under 13
14+
–
Unsuitable for Ages under 14
–
16ans+
Unsuitable for Ages under 16
18+
18ans+
Adult Audience Only
Note(s)
●
The V-Chip can Block Non Rated Programs as per “CEA-608-E sec.
L.3”. If the Option to Block
NR
,
None
or
E
Programs are used in
US movie ratings lock
,
US TV ratings lock
,
Canadian English
rating
or
Canadian French rating
accordingly “unusual results may
occur and the Unit may not Receive Emergency Bulletins or other
Types of Programming”: / Emergency Bulletins (Such as EAS
messages, Weather Warnings and Others) / Locally originated
Programming / News / Political / Public Service Announcements /
Religious / Sports / Weather.
Setting your Location to Home
You can set the
Location
of your TV to
Home
or
Retail
.
Choosing
Home
gives you full flexibility to change predefined
settings for Picture and Sound.
1
Press
TV MENU
and use
to select
Features
, then
press
OK
.
- -
Home
Software upgrade
E-sticker
Location
fun-Link (HDMI CEC)
Child lock
PC settings
Caption settings
USB
Language
Features
Setup
Sound
Picture
2
Use
to Select
Location
, then press
OK
.
3
Use
to Select
Home
, then press
OK
.
Note(s)
●
You must set
Home
in the Menu. Otherwise, personalized
Picture and Sound Settings will Not Be Memorized after the Unit
goes into Standby Mode.
5 Install Channels
Autoprogram
Be sure the RF cable is correctly connected to this Unit and
you are registered with your Cable TV provider when you
Install Cable channels.
1
Press
TV MENU
and use
to select
Setup
, then press
OK
.
2
Use
to Select
Autoprogram
, then press
OK
.
●
If you run
Autoprogram
when you have Locked Channels, a
Message appears asking to enter your PIN. Enter your PIN in
order to Complete the Installation. You need to set the
Channel Lock again after the Installation.
3
Use
to Select an appropriate Option, then press
OK
.
–
When
Antenna
is selected, the TV Detects Any Off-the-Air
Antenna Signals. It searches for ATSC (Digital) and NTSC
(Analog) Channels available in your Area.
–
When
Cable
is selected, the TV Detects Signals supplied by
Cable. It searches for ATSC (Digital), NTSC (Analog) and
Cable Channels available in your Area.
Cable
Antenna
Back
ANTENNA IN
Or
Cable
Antenna
Select your signal source.
Language
Features
USB
Setup
Sound
Picture
minutes to complete.
Auto programming may take more than 20
Auto program will rescan all channels.
●
When the Scanning and Memorizing of Available Channels is
Completed, the Lowest Memorized Channel will be
Displayed.
4
Follow the On-screen Instructions to Complete the
Installation.
10