Replace both #1629 Belt Releases and secure
each with original Locknuts.
NOTE:
Assemble
such that “Tab” on both Belt Releases is “forward”
of their Locknuts!.
Make sure Belt Release’s Lower and Upper Rods
are always on the “outside” of the Belts ...
NEVER
inside! Belt Release’s Upper Rods should be on
top
and
over
the outside face of its pair of Belts
(#1 & #2 on the right; #5 & #6 on the left).
Belt Release’s Lower Rods should be
below
and
under
the outside face of it’s Belts (#3 on the right;
#4 on the left).
At this time “close-up” your Crawler following in-
structions for Seat & Rear Cover Assembly sec-
tion (below).
Don’t forget
to reconnect #1824 &
1825 Plugs!
27
#1629
Nut
Tab
Upper Rod
Lower Rod