Magnat Audio PRIME ONE, Важные указания по установке и гарантийный талон

Страница: 10 / 32

10
SYSTEM INSTALLATION (FIG. 1)
Connecting the power supply:
Included in delivery are an external mains adapter (B) (110 - 240 V / AC 50/60 Hz) and the most commonly used mains cable.
The mains cable used in your country, however, may be different. If the mains cable is not compatible with your power sockets
or if you are in any doubt, please contact your Magnat dealer.
1. Connect the output cable (jack connector) of the external mains adapter to the power supply jack of the loudspeaker (2).
2. Insert the mains cable into the jack on the mains adapter.
3. Insert the mains cable into the socket. Make sure that you are using the mains plug that is compatible with the socket
(refer to the information above).
Connecting an audio source to the audio input AUX IN:
Use the supplied audio cable (C) and connect the audio output of the audio source to the audio input AUX IN (4).
Connecting a mobile device (mobile phone, MP3 player, etc.) to the USB charging socket USB CHARGE (3):
Devices that have a USB charging function can be connected to this socket and charged (Charging voltage: 5V, max. charging
current: 2.0A).
Please also refer to the instruction manual supplied with the corresponding device!
Connecting the device to a Bluetooth audio source:
Select the PRIME ONE‘s Bluetooth input (see also OPERATION).
Enable Bluetooth on your smartphone or other device.
Make sure the LED indicator is blinking rapidly blue. (If it isn’t, switch the speaker off and on again.)
Choose MAGNAT PRIME ONE from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your
phone’s Bluetooth menu.)
When it’s finished pairing and connecting to your smartphone, the LED indicator is blue.
Note:
• If you have previously connected a Bluetooth device, the MAGNAT PRIME ONE will automatically attempt to re-establish a
connection with this device.
• The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more
information and specific instructions.
• The MAGNAT PRIME ONE supports the „Qualcomm® aptX™“ high quality audio transmission standard. If your source
device also supports this standard, „Qualcomm® aptX™“ will be selected automatically as the transfer mode when
establishing a Bluetooth connection.
OPERATION
Speaker controls:
Rear Panel
(1) POWER SWITCH:
After installation use this switch to turn on the device. If the device is not going to be used for a prolonged period, it
should be switched off.
Front Panel
(5) LED status display (front):
• red: standby mode
• green: analogue input active
• blue: Bluetooth input active, connected to the source device
• blue, flashing: Bluetooth input active, device in pairing mode