Magnat Audio MC 2 S, Важные указания по установке и гарантийный талон

Страница: 13 / 52

13
GB
1 oN/StbY
Switches the device on when it is in the
standby mode. If the LED does not
illuminate, actuate the power switch
located on the rear of the device.
Conversely the device can be switched
from power operation to the standby
mode.
2 ejeCt
Opens or closes the CD compartment.
3 plAY/pAuSe
Starts or pauses the playback from a CD.
4 Stop
CD operation: Stops a CD that is playing.
Radio operation: Opens the internal
memory for the station presets.
5, 6 SKIp/tuNe
CD operation: Jumps to previous / next title.
Radio operation:
Brief press: Changes the receiving
frequency in 50kHz increments (manual
station search)
Press and hold: Searches for the next
station on the selected band (automatic
station search).
7 SourCe
Used for selecting the input source (CD,
TUNER, PHONO, TAPE, AUX, LINE).
This is indicated on the display (14) briefly.
8 CD CoMpArtMeNt
Insert the CD into the compartment with
the label facing upwards.
9 VoluMe
Adjusts the volume. The knob needs to be
turned through approximately two
revolutions to alternate between minimum
and maximum volume. The volume is
shown on the display (14). (VOL 00 - VOL
60/max).
10 uSb INput
For connecting USB storage media.
11 lINe IN
3.5 mm stereo input jack for an auxiliary
audio device (e.g. MP3 player, etc.).
12 pHoNeS
3.5 mm stereo output jack for headphones.
The speakers are deactivated when this
jack is used. Set the volume to a low level
when connecting headphones.
13 SeNSor For tHe reMote
CoNtrol
Please aim at this sensor when using the
remote control.
14 DISplAY
Displays the settings you have made.
operAtIoNAl eleMeNtS AND CoNNeCtIoNS – FroNt pANel