NOTE:
This scanner has 128MB of built-in memory for saving scanned
images. This film scanner will also accept SD, SDHC, and SDHX cards with
a maximum of 128GB for extra memory. If you are using a 128GB SD card,
it may need to be formatted before using for the first time. Please see
below for formatting instructions.
Using an SD Card
1. Insert the SD card, label down, into the SD card slot located at
the back of the film scanner. The SD card will click in if inserted
properly.
2. Remove the SD card by pressing on it until it clicks and pops
out, then remove it from the slot.
1. In the Main Menu, go to FORMAT. Press the OK button.
2. When prompted if you would like to format the SD, use the
< button to choose “Yes”. Press the OK button to begin
formatting the SD card.
Formatting Your SD Card
WARNING:
Formatting your SD card will delete all files stored on the
SD card. Download your files from your SD card to your computer
before formatting.
Scanning Your Images
1. Press the SCAN button to select Capture mode and press OK.
2. You should now see your film or slide image on the screen
and the corresponding film/slide type is listed at the lower
left corner.
NOTE:
Image on screen does not reflect scanned image quality.
3. To adjust Brightness or Color, press the OK button. Use the
left/right arrows to move between Brightness (EV), Red (R),
Green (G), or Blue (B). Press the OK button to adjust them
individually.
4. Once all settings are correct, press the SCAN button to return.
12
