Preparing the Film Scanner
1. Press and hold the Power button on the scanner to turn it on.
2. Insert the prepared film or slide adapter into the slot on the
right side of the film scanner.
3. In the Main Menu use the arrow keys to highlight the
FILM TYPE option and press the OK button to select it.
4. Use the > arrow key to cycle through Negatives, Slides, or
B&W. Press the OK button to select it.
5. The next screen will show the different sizes of your selection.
Use the > arrow key to select the correct size and press the
OK button.
IMPORTANT:
The quality of the original slide/film will impact the
quality of the scanned image.
Cleaning and Care
Use the included cleaning brush to ensure there is no dust or debris
on the lens. Insert the soft end of the brush, face down, into the
film/slide holder slot. Carefully push the brush around inside to get
rid of any dust or debris that may be on the lens.
11
