26
MAGNAMED
Ventilator Analyzer -
VentMeter
P/N: 1901509
– Rev 05
Caution
•
Follow the central command instructions to calibrate the oxygen concentration
measurement.
•
Replacements should be done with the recommended oxygen sensor.
•
OXYGEN SENSOR REPLACEMENT:
o
MAXTEC
– MAX-13 – O2 SENSOR
o
MAXTEC - RP16P02
– Tee Adaptor
o
MAXTEC - R110P10
– Flow Diverting
7.4 Before Use
This inspection routine is intended to orient the user to carry out a simple procedure and quick equipment test
before each use or at least at the beginning of each working period, assuring high reliability to the
measurements.
7.4.1 Initial Procedures
•
The equipment should be turned off.
•
Integrity of all accessories and the equipment
– visual inspection.
•
Check if all the accessories are correctly and firmly connected.