19
MAGNAMED
Ventilator Analyzer -
VentMeter
P/N: 1901509
– Rev 05
In this case there will be only Monitor Screen (1) with the expired volume in the left side of the screen,
frequency (rate) in the middle of the screen and the inspired volume in the right side of the screen.
Note
•
The parameters will always be shown in the sequence presented in the Monitor Screens
(3,4 and 5).
•
In example (c) instead of Vexp, Vinsp and Freq order it will show Vexp, Freq e Vinsp.
d. Selecting Vexp, Vinsp, Freq and FiO2
In this case there are four parameters to be shown in two screens. Screen Monitor (1) with three
parameters (Vexp, Freq and FiO
2
) and Monitor Screen (2) with Vinsp in the middle of the screen.
Notice that in this situation the Monitor Screen (2) will show in its superior right corner the number 2
indicating that it is two screens of distance from the
Main Screen
and the Monitor Screen (3) will
show in its superior right corner the number 3 indicating that it is three screens from the
Main
Screen
.
e. Selecting Vexp, Vinsp, Freq, FiO2 and Cdyn
The Monitor Screen (1) will show (Vexp, Freq, FiO
2
) and the Monitor Screen (2) will show the inspired
volume (Vinsp) in the left side and the dynamic compliance (Cdyn) value in the left side of the screen.
f. Selecting Vexp, Vinsp, Freq, FiO2, Cdyn and Pmean
The Monitor Screen (1) will show (Vexp, Freq, FiO
2
) and the Monitor Screen (2) will show (Vinsp,
Pmean, Cdyn).
