☛
R
☛
☛
☛
R
Step 6: Transmitter Programming
(Continued)
Push Arm/Disarm
(Regular)
or Lock Button
(Code Hopping)
The LED will begin flashing slowly and the horn/siren will emit 1 short chirp. The code has now been learned.
Note 1: “Regular” transmitters supplied are “Not” coded alike so you need to code in the second transmitter now by pushing the “Arm/Dis”
button on the second transmitter. Go to Step 7.
Note 2: “Code Hopping” transmitters supplied are “Not” coded alike so you need to code in the second transmitter now by pushing the
“Lock” button on the second transmitter.
Note 3: If you are coding a “Code Hopping” transmitters, skip steps 7, 8, 9 and 10 and go to step 11. No further coding procedures are
necessary. Code hopping transmitters learn all button functions when the “Lock” button is learned.
R
☛
PANIC
AUX
LOCK
UNLOCK
☛
Code
Hopping
Regular
Arm/Dis #2
☛
Regular
Arm/Dis
#2
☛
Regular
Arm/Dis #2
S t e p 6
☛
To Code #2 Button Push
the Valet Switch 2 Times
(Represent 1 Time On/Off)
The LED will be solid red and the
horn/siren will chirp 1 time.
S t e p 7
2x
Push the “#2” Button
The LED will begin flashing slowly and the horn/siren will chirp 2 times.
Note 1: “Regular” transmitters supplied are “Not” coded alike so you need to code in the
second transmitter now by pushing the #2 button on the second transmitter.
S t e p 8
☛
R
Regular
Arm/Dis #2
#3
☛
Push the “#3” Button
The LED will begin flashing slowly and the
horn/siren will chirp 3 times.
Note 1: “Regular” transmitters supplied are “Not” coded
alike so you need to code in the second transmitter now
by pushing the #3 button on the second transmitter.
S t e p 1 0
☛
To Code #3 Button Push
the Valet Switch 2 Times
(Represent 1 Time On/Off)
The LED will be solid red and the
horn/siren will chirp 1 time.
S t e p 9
2x
S t e p 1 1
Turn Off the Ignition
The horn/siren will emit 1
short chirp and 1 long chirp.
You are now out of the
consumer transmitter code
learning mode. The LED is off.
OFF
13
