BLUEPIRAT2 | USER MANUAL/
page 24 of 82
7
Starting BLUEPIRAT2
Connect the BLUEPIRAT2 via the power harness (
red/+/clamp 30
and
black/GND/-/clamp 31
)
with the vehicle battery or a power supply.
Figure 7.1: Power connection of the BLUEPIRAT2
Note: BLUEPIRAT2 5E has a separate power cable which is separated from the main ca-
ble set!
Figure 7.2: Power connection of the BLUEPIRAT2 5E
Attention:
If you have ordered an external antenna, e.g., for GPS, the connector has to be bolt only
by hand, NOT with any tools!
Switch the BLUEPIRAT2 on by pressing the
[ON / Trigger]
button and wait until the logger is
ready. The logger shows available bus ports.
Figure 7.3: Switching on