Magna BluePirat Remote, Руководство пользователя

Страница: 49 / 83

REMOTE CONTROL TOUCH | USER MANUAL/
page 49 of 83
6.3 Display
The display of the Remote Control Touch / BLUEPIRAT Remote is similar to those of the data
loggers. An overview to their meanings is provided in the following table. You can find the view
that contains the display via the cross reference in the column “See”.
Display Meaning See
Bus load indicates the degree with which the bus
is busy with data transfer 6.2.2.3
6.2.3.2
DHCP mode can be configured under General

Net-
work settings
indicates whether the device functions as
a server or a client or whether DHCP
was disabled
Fehler! Verweisquelle konnte n
icht gefunden werden.
Error count indicates the number of active errors
(can be viewed in the bug reporter) when
the status is ERROR or WARNING Fehler! Verweisquelle konnte n
icht gefunden werden.
Device name can be configured under General

Name
provides orientation in the application
and is part of the trace file's file name
6.1.1
6.2.1
Fehler! Verweisquelle konnte n
icht gefunden werden.
Device status
see Table 6.5: Device status messages 6.2.1
Fehler! Verweisquelle konnte n
icht gefunden werden.
Device type
see
Status - Overview 6.2.1.1
Memory percentage
protected can be configured under General

Buffer
indicates the percentage of the memory
capacity that is protected
Fehler! Verweisquelle konnte n
icht gefunden werden.
IP address
indicates the IP address of the device 6.2.1
Fehler! Verweisquelle konnte n
icht gefunden werden.
Channel name can be configured under *Bus*

*Bus
#...*

Name
provides orientation in the application
and is part of the trace file's file name
6.2.2.3
Channel number serves as index for sorting the channel
lists
is obtained from the configuration in the
System Client 6.2.2.3
Configuration name
can be configured under General

Name
indicates the name of the configuration
on the device
Fehler! Verweisquelle konnte n
icht gefunden werden.
Logger name can be configured under General

Name
helps mapping logger-specific tabs
6.2.3.2
Markerlist contains the markers of the set triggers
sorted by index
Each marker is specified by the time
(date and time) the trigger was set. The
button is used to play the voice note.
6.2.2.2
Message category see Table 6.2: Message categories 6.2.3.2
Storage capacity depends on the internal memory
Since the Remote Control Touch does
not have internal memory, the tab shows
“0 GB”. Fehler! Verweisquelle konnte n
icht gefunden werden.
Subnet mask
indicates the subnet mask of the con-
nected device
Fehler! Verweisquelle konnte n
icht gefunden werden.