REMOTE CONTROL TOUCH | USER MANUAL/
page 36 of 83
6.2.2
The application [Driver View] |
Management of the function keys, markers and voice notes
The application
Driver View
is used for setting triggers, recording voice
notes or pressing the function keys. Further functions are overviews of
existing markers and hints, administration of test drives and shutdown the
TSL network.
6.2.2.1
Driver View
– Function keys
The window of the tab sheet
[Function keys]
contains two buttons on the left and ten function
keys on the right. The function
keys can be assigned “complex triggers” (see
User manual for
the System Client
). The name of the complex trigger is shown as text on the key.
[Trigger]
button
Function keys
[F1]
to
[F10]
Trigger count
[Record]
button
Figure 6.8
: Tab sheet “Function keys”
6.2.2.2
Driver View
– Marker list
The window of the tab sheet
[Marker list]
contains two buttons on the left and a list of set mark-
ers on the right. The markers are sorted by index and indicate date and time of the setting. A
trigger that was set using the
[Record]
button contains a voice note. This is indicated by the
button in the marker entry.
[Trigger]
button
Marker list
[Record]
button
Button to the voice note
Figure 6.9
: Tab sheet “Marker list”
