BLUEPIRAT MINI | USER MANUAL /
page 38 of 62
If the connection is getting lost, it will take about 5 seconds to build up a new connection for log-
ging data again.
11.7.1.4
UDPServer
The BLUEPIRAT Mini can be configured as a UDP server by setting up an IP address and port
number.
There is an adjustable timeout. The connection will be terminated if no data arrives. This ap-
pears as a message in the trace file. There is no configurable debug level. The BLUEPIRAT
Mini as a UDP server accepts UDP data packets, UDP multicast and UDP broadcast packets.
If the connection is getting lost, it will take about 5 seconds to build up a new connection for log-
ging data again.
11.7.1.5
TCPServer
The BLUEPIRAT Mini can be configured as a TCP server by setting up an IP address and port
number.
There is an adjustable timeout. The connection will be terminated if no data arrives. This ap-
pears as a message in the trace file. There is no configurable debug level. The BLUEPIRAT
Mini as a TCP server accepts TCP data packets, TCP multicast and TCP broadcast packets.
If the connection is getting lost, it will take about 5 seconds to build up a new connection for log-
ging data again.
11.7.1.6
SpyMode
By using the Ethernet Spy mode it is possible to log all Ethernet data (promiscuous mode).
More information can be found in the
System Client User Guide
.
11.7.1.7
EsoTrace
By using the EsoTrace mode it is possible to log data in the EsoTrace protocol.
More information can be found in the
System Client User Guide
.
11.7.1.8
Camera (license required)
If you use a camera license on the data logger, it is possible to connect up to four Ethernet
webcams to the BLUEPIRAT Mini. After connecting the BLUEPIRAT Mini is able to log MPEG4
video streams.
More information can be found in the
Camera User Guide
.
11.7.1.9
DLT
If you use DLT on the data logger, it is possible to connect up to 16 ECU for logging their DLT
messages.
11.8
MOST150
The
BLUEPIRAT Mini MOST150
data logger is able to log messages from the MOST150 bus
of the following types.
Status
MPR (Maximum Position Register), MDC (MOST Data Channel), Light on,
System Lock Flag, Shut Down Flag, Ring Lock Flag, Open Ring/Multi Master
Flag, Node Position
Changes of the states are only logged when the state is changing.
Control
Control Messages
Streaming
*1
Synchronous and isochronous data
