FacilityPro POS 3000 manual, version MAN9 PS3000 UKED 4512.doc 10
3
Installation
How to install the FacilityPro POS 3000:
1.
Install the Magnabox on a suitable protected and smooth surface within 1.5 m of the
cash register, out of view of the cashier and the customer and allowing for the cable set
to be neatly concealed (follow the instructions in the Magnabox installation and user
manual).
2.
Assemble the MC POS cable by connecting one of the modular cables to the RJ12-female
DB9 adapter.
3.
Connect the female DB9 connector of the MC POS cable to the cash register.
4.
Insert the RJ12 connector of the MC POS cable into the port ‘READER2/RS232’ of the
Magnabox.
5.
Assemble the Atlas card reader (Atlas, base and suction cups) following the instructions
in the Atlas installation and user manual.
6.
Insert an RJ 12 connector of the second modular cable into the port ‘READER1’ of the
Magnabox.
7.
Slide the base off the Atlas card reader and insert the other RJ12 connector of this
cable, through the hole in the base, into the port ‘1’ of the Atlas, and slide the base of
the Atlas back on.
8.
Install the card reader on a smooth surface, usually the counter (where the customer
will have a good view of the display and allowing for the cable to the Magnabox to be
neatly concealed). Use the suction cups to secure it.
9.
Insert the power plug of the power supply for the Magnabox into the port ‘POWER’ of
the Magnabox.
10.
If the FacilityPro POS 3000 will be connected to a network (Ethernet LAN or mobile or
analogue telephone network), follow the appropriate instructions in the Magnabox
installation and user manual to establish the connection to the network.
11.
Insert the plug of the power supply for the Magnabox into a socket.
