Magmaweld RS 350 M - MW Скачать руководство пользователя страница 19

Страница: 19 / 176

www.magmaweld.com

USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU

RS 350 M - MW / RS 400 M - MW / RS 500 M - MW

Figure 5 : Long Harness Connections

• Machines with harness longer than 5 meter have detachable harness and wire feeding connection in order to

lift easier. Both ends of the harness are the same, therefore sockets and connectors must be connected to the

wire feeding unit same as the connections to the front side of the machine.

• If your machine has harness longer than 5 meter, connect the harness to the wire feeding unit as seen below.

2.4.4 Connections for Long Harness

16 - c

16 - b

16 - a

16 - c

16 - b

16 - a

16 - d

16 - e

2.4.3 Water Cooling Unit (for MW Models)

Installation

• Unit The water cooling unit is used to cool the torch It is a closed circuit system consisting of radiator, fan,

pump coolant reservoir.

• Connect the cold (blue) water hose to the cold water outlet on the water cooling system, and the hot (red)

water hose to the hot water inlet on the water cooling system.

• Magmaweld welding machines come with Magmaweld coolant, which is produced to give the best

performance. In case of lack of coolant, open the coolant reservoir cap and add Magmaweld coolant suitable

for the temperature of the working environment. The coolant must be within the minimum and maximum

values shown on the front panel of the unit.

• Different coolant or water should not be added. Different liquid additives can cause chemical reactions or

different problems.

• Magmaweld is not responsible for the risks that may arise in case of adding different liquids. All warranty

provisions will be void if different coolant or water is added to the Magmaweld coolant.

• If it is desired to use a different brand of coolant, the inside of the coolant tank should be completely empty

and there should be no residue or liquid in it.

• It is not suitable to use the water-cooling units with welding machines other than manufactured by Magma

Mekatronik Makine ve Sanayi Ticaret A.Ş. Water cooling units cannot be operated with external supply.

Содержание RS 350 M - MW

















































































































































































Результаты поиска

Содержание RS 350 M - MW

Отзывы:

Похожие инструкции для RS 350 M - MW

Бренды по названию

Популярные бренды

Magmaweld RS 350 M - MW, Руководство пользователя

Результаты поиска

Содержание RS 350 M - MW

Отзывы:

Похожие инструкции для RS 350 M - MW

Бренды по названию

Популярные бренды