Magmaweld ID 400 MK PULSE EXPERT, Руководство пользователя

Страница: 27 / 180

EN
27
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
ID 400 MK PULSE EXPERT / ID 400 MKW PULSE EXPERT
PAGE 5
The starting current will be determined. It will operate as a percentage of the main current. It will be active
when 6 trigger mode is selected. Even though it allows setting for other modes, it will not work.
Setting Range
• %0-200
a) STARTING C. (STARTING CURRENT)
Start time will be set. It will be active when 6 trigger mode is selected. Even though it allows setting for other
modes, it will not work.
Setting Range
• 0-5 sec.
b) STARTING T. (STARTING TIME)
Finish Current will be determined. It operates as a percentage of the main current. It will be active when 6
trigger mode is selected. Even though it allows setting for other modes, it will not work.
Setting Range
• %0-200
c) FINISH C. (FINISH CURRENT)
The finish time will be set. It will be active when 6 trigger mode is selected. Even though it allows setting for
other modes, it will not work.
Setting Range
• 0-5 sec.
d) FINISH T. (FINISH TIME)
Operation