background image

5

IMPORTANT!!

• DO NOT CONNECT A HIGH-PRESSURE SUPPLY HOSE 

FROM A NON-REGULATED TANK DIRECTLY TO GRILL.

Magma's grills are designed for use with small disposable propane canisters or with pre-regulated low-
pressure propane and optional low-pressure valves. Running high-pressure propane fuel supply lines on a
boat is in violation of American Boat & Yacht Council (ABYC) guidelines and is not considered a safe
application. Additionally, impurities found in larger refillable propane tanks may clog the small orifices in the
high-pressure control valve/ regulator causing it to lose performance capabilities and eventually fail.
Regulating these tanks to 1/2 PSI and using this pre-regulated propane with the correct low-pressure valve
will 

e

nsure safe, efficient performance of the grill.

USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS

• Magma On-Board LPG (Propane) Valves and
Hose Kits allow grills to be installed within a
boats existing on-board, pre-regulated low
pressure LPG (Propane) system. Use only

Magma A10-220 Low Pressure Propane Valve

in conjunction with 

Magma A10-225 LPG 10'

Hose Kit

, as other hoses, valves or fittings may

result in damage or injury.  

• A primary shutoff valve 

(supplied with

A10-225 hose kit)

must be used in  conjunction

with this control valve at the point of
connection into your system. This allows for
shut off of the gas supply to the hose leading
to the grill.

Gently insert valve stem into venturi tube upside down
until fully inserted and rotate as shown.

Propane (LPG)

Gas

Regulator

A10-225 LPG (Propane)

10' Gas Grill Conversion Kit

To other LPG
appliance
or use cap

Shut off

valve

Cylinder Valve

Gauge

Gas grill

Type 3

Valve

Solenoid

Typical Boat and R.V. Application

Содержание WM-1700












Отзывы: