CONTROL VALVE REGULATOR
A10-207-3 and A10-217-3
• Uses standard 1-lb. disposable propane canisters (DOT-39 NRC).
• Prior to installing valve, become familiar with the valve function and
graphics on valve knob. Never force the knob. Always turn or push gently.
• Turn control valve to “LOCK” and install gas canister being careful not to
cross the threads. Check for leaks prior to use, by brushing soapy water
solution around threads and orifice hole checking for bubbles.
• Position valve with gas bottle as shown (A). Gently insert valve stem into
the turbo venturi tube. Rotate until valve stem key aligns with lock detent
allowing valve to fully insert. Rotate gas canister down (B).
CONNECTING FUEL SOURCE
OFF/
Lock
ON
Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed that way and will not leak.
The valve was designed to be loose fitting in order to allow safe, easy installation and removal of the propane canister
and so it easily swings without resistance to fit all applications.
5
Align valve stem key
to valve chamber lock
detent and rotate
CONTROL VALVE REGULATOR
A10-207-3-CE2 and A10-217-3-CE2
A
B
Valve Stem Key
Lock Detent
High
Low
Medium
Indicator
Lock
Off
Unlock
