CONTENTS
Each Magma
®
Gas Grill is individually fire tested before it leaves the factory.
For this reason, the burner on your grill may be slightly discolored.
SETTING UP YOUR GRILL
Mounts sold separately. See our website www.MagmaProducts.com for mounting options.
3
Grill Grate
Radiant Plate
Turbo Venturi
Tube Assembly
Grill Body
Dome
Indexing “L” Bracket
& Clamp Assembly
Tool
Needed
9/16”
Wrench
not included
1 Select and install appropriate Magma mount in your desired location. Prior to installing the grill, check that
mount does not easily move with a reasonable force applied.
2 Next, decide if gas control valve will be easier to access from the center right side or center left side of grill.
This will be based on your placement of the mount (see picture front cover). Now, slide L-Bracket & Clamp on
to mount knurled rod so that the threaded flat L-portion of the L-Bracket points in that direction.
3 Adjust threaded flat surface of L-Bracket to level position and tighten firmly with 9/16" or adjustable wrench so
that L-Bracket & Clamp cannot be moved. NOTE: Level positioning is critical for even temperatures across the
cooking surface.
4 Carefully hold the grill body, with the lid closed, and thread on to L-Bracket VERY TIGHT so that grill does not
unthread easily. Check that grill is tight and level prior to proceeding.
1
4
Level
Flat
Surface
3
2
For Models
A10-207-3 &
A10-217-3
Control Valve/Regulator
Type 1 Low-Output
For Models
A10-207-3-CE-2 &
A10-217-3-CE-2
Control Valve/Regulator
Type 2 Low-Output
