Magma MARINE KETTLE 3 A10-207-3-CE-2, Руководство пользователя

Страница: 16 / 16

CYLINDERS:
If there is a leak on your appliance (smell of gas), immediately attempt to turn off cylinder valve. Turn off
appliance control valve. Remove appliance to a well-ventilated location away from any ignition source.
STORAGE: NEVER LEAVE GAS CYLINDERS CONNECTED WHEN NOT IN USE!
CYLINDERS:
When you have finished using this appliance, turn gas cylinder off; wait for the flame to go out and turn the
appliance control valve off. Remove appliance control valve from appliance and store control valve in a dry, non-corrosive
environment. • Store fuel containers outdoors, in a well ventilated area, out of reach of children, never below decks on boats.
(Any indoor storage shall comply with Section 2 Minor storage and usage of AS/NZS 1596).
HOSES: Only use the hose assembly as supplied with this appliance for connection to the cylinder — DO NOT USE
ADAPTORS. Use RECA 8 mm hose and regulator (AGA Cert No:7214, Hose 8 mm LP class A, Regulator RECA 718 or
698 2kg/hr). Connections must be spanner tight per AGA requirements. Make sure gas hose is in good condition and avoid
twisting or kinking.
PACKING MATERIALS: BEFORE INSTALLATION OR USE!
• Open package containing grill and components, remove all contents.
PACKAGE CONTENTS:
• Grill body
• Grill cooking grate
• Components package
• Remove grill from plastic bag.
• Open grill lid and remove, small, components package.
COMPONENT PACKAGE CONTENTS:
• Radiant burner plate and dome assembly
• Turbo venturi tube and control valve/regulator assembly
• L-bracket assembly, for attaching grill to mounting option
• Product owner’s manual
• Remove all components from box and paper bags.
• All necessary assembly instructions are detailed in the provided owner’s manual.
• These appliances shall only be
used with propane cylinders
certified to standard AS2030.
• It may be hazardous to attempt to
fit other types of gas containers.
The burner should be snug, but not over
tightened. Ensure that one end of the burner
ground strap is positioned directly over the
electrode. With the ground strap above the
Electrode Wire, the gap must be 1.28 mm
(0.050 in). Use the included feeler gauge to
confirm and/or adjust for the correct gap.
Adjustment is made by slightly bending
the end of the ground strap, up or down
depending on the need. Check for spark
and immediate ignition before normal use.
Electrode Electrode
Burner Ground Strap
83-207-3AU-3
0319
• Orifice size for models A10-207-3AU-3
and A10-217-3AU-3 is 0.71 mm.
• The nominal gas consumption
for models A10-207-3AU-3 and
A10-217-3AU-3 is 7.5 MJ/H.
On Board Pre-Regulated Low
Pressure Propane Systems (LPG)
Models A10-207-3AU-3 & A10-217-3AU-3