Magma MARINE KETTLE 3 A10-207-3-CE-2, Руководство пользователя

Страница: 6 / 16

5. With grill body tightly attached to L-Bracket and taking care not to damage electrode, unthread burner 3 full revolutions
only. CAUTION: DO NOT UNTHREAD MORE THEN 3 REVOLUTIONS, AS GRILL MAY FALL OVERBOARD.
• Lift entire grill up to disengage from grease tray positioning pins (5a & 5b)
and rotate so lid operates freely in desired position (5c).
• Carefully lower back down (5d), making sure pins are re-engaged and rethreaded “burner” back 3
revolutions until tight. If burner does not turn 3 revolutions the pins are not engaged properly.
5.
Grease Tray
5a
Grease Tray Pins
Threaded
Burner Pipe
5b
5c 5d
6. Install radiant plate & dome over burner on fire pan ridge.
7. Install grill grate by rotating grate so that both grill grate tabs slide under the holding
clips (7a), locking grate and all internal components in correct position.
8. Insert the turbo venturi tube into the threaded pipe on the bottom of the grill body and firmly tighten the threaded nut
so nut doesn't turn while rotating the turbo venturi tube. NOTE: Turbo Venturi Tube should still rotate freely. Venturi
tube should be stowed with valve in a clean dry environment when not in use. (See “Stowing Tips”, Page 9) Before
each use, prior to inserting venturi tube, check that the threaded pipe is free of spider webs or other obstructions.
8. 7a 6. 7.
SETTING UP YOUR GRILL
6