Magma
EB7-X8G2 | Chapter 4 Install PCIe Cards
39
When you have finished changing the default user name and password save the current changes by clicking on the
Save New Credentials
button at the bottom of the screen:
Reset to Default Values
You can restore your EB7-X8G2-RAS chassis to the factory default values by pressing and holding the Alarm Reset Button
for 10 seconds the Power LED will blink during this 10 second period. When all values have been restored, the LED will stop
blinking and turn off.
Configure your SNMP Agent
If you use an SNMP agent to help you monitor your network, you will find all necessary monitoring information in the MIB
file.
Retrieving the MIB File
The MIB file is available for download at:
http://www.magma.com/drivers.asp
in the SNMP section of that page.
After you click on the MIB file link, save the file as type “All Files” to your preferred location. You may then open the file
(using Notepad, or equivalent text editor) and all the information needed to configure your SNMP agent will be
displayed on the screen:
Once the MIB file is saved it can now be copied and loaded locally or to a remote server.