Magliner CooLift CPA43HTC, Руководство пользователя

Страница: 26 / 30

1-800-MAGLINE (624-5463) Page 26 www.magliner.com
CooLift
®
Area
Description
Method of Inspection
Normal Condition
Findings
Pass or Fail
Timing
Notes
Brake System
Mounting screws on brake discs are tight
Visual inspection
•
Mounting screws on brake disc are not backing out
•
Brake disc is mounted tightly to the center wheel
W
eekly
Brake System
Holding brake pawl in good condition and operating properly
Visual inspection Set brake
•
No visible damage
•
Brake locks in place
Daily
Suspension
Wheels and tires are in good condition
Visual inspection
Wheels and tires are free of damage
W
eekly
Suspension
Components are straight and undamaged • Front wheel mounting yoke • Main axle • Rear swivel caster frames
Manual inspection
•
Components are not damaged and operate freely
•
Main axle plating is not cracked or damaged
W
eekly
Operator Interface
External mounting screws are tight • Base plate mounting to frame • Enclosure mounting or base plate • Handle mounting screws • Switch mounting hardware is tight
Manual inspection
Components are tight to mounting surfaces
W
eekly
Operator Interface
•
Handle, enclosure and door are free of damage and in good condition
•
Door latches are fully functional
Visual inspection
•
Straight sections
•
Smooth curves
•
Flat surfaces
•
Minor scratches and dings are expected
W
eekly
Operator Interface
Handle grips
Visual inspection
Grips are not worn or damaged
W
eekly
Operator Interface
Containment strap
Manual / V
isual
inspection
•
Belt should be free of tears and abra
sions
•
Plating on buckle should not be cracked or damaged
•
Mounting screws should be tight
•
Mounting tab should not be bent or damaged
•
Belt should retract into housing such that only the buckle protrudes
•
Housing should not be cracked or damaged
•
Strap tongue should rotate freely
W
eekly