Magio MG-585, Инструкция по эксплуатации

Страница: 25 / 28

23
Operation
Charging the appliance
Using the clipper on the mains
- Before using the appliance for the first time, charge the battery
continuously for 3 hours. Maximum battery capacity will only be
reached after 3 completed charging and discharging cycles.
- Connect the adapter to the mains and then to the charging port.
The digital display will show the battery charge level in percentage.
Note: Make sure the appliance is turned off before connecting it to
the mains.
Make sure that the clipper is switched off. Plug into a suitable
mains socket. Wait for approximately a minute, and then switch on.
Don’t use the clipper in this mode for more than 20 minutes.
In order to maintain the optimum capacity of the rechargeable
batteries, the appliance should be recharged for 3 hours
approximately every 3 months.
Note:
Replacement of blades
1. Turn off and unplug the appliance and set the cutting length
adjustment lever to position A (pic. 1).
2. Unscrew the screws (pic. 2) and remove the fixed blade. Put the
screws in a safe place.
1
2
3
0.5-1.0mm
4
EN