9
4.2.3. Fixing to stone/concrete
To drill suitable holes for dowels use a ¼" drill bit when installing in masonry or concrete
surfaces. After drilling, push dowels into hole until flush with surface. Then secure the stand by
using the screws supplied.
4.2.4. Fixing to timber
Use a 1/8" masonry drill for pilot drilling respective holes in timber. After drilling the holes,
secure the stand using the supplied screws.
4.2.5. Completing the camera installation
Screw an aerial into the aerial connection at the rear of the camera. Then connect the security
camera to one of the power supplies. Next, connect the power supply to the mains.
