12
5. Operation
5.1. Operating and indicating elements
The front of the receiver contains two indicating panels (K) and (L) and a button (M) for
changing the reception channels. The selected reception channel 1-4 is lit up in the indicating
panel (K). The left LED (very left on page) is reception
channel 1.
The automatic channel change function is active if
the LED of the small indicating panel (L) is lit.
By pressing the CH SELECT (M) button, the reception
channels 1-4 are selected in sequence after which the
automatic channel changing function is activated.
By pressing the button again, the automatic chan-
nel changing function is switched off and reception
channel 1 is displayed again.
5.2. Automatic channel changing function
The radio monitoring facility can be extended by a further three cameras. Each camera must
transmit to another channel (1-4).
Note:
• The transmission frequencies of the security camera and receiver have been facto-
ry preset. The security camera transmits on the frequency of one of the available four
reception channels of the receiver. After switch-on, the transmission channel of the
used security camera must be selected on the receiver. The transmission channel of
the security camera can be selected at the back of the receiver.
(K)
(M)
(L)
