![background image](http://html1.mh-extra.com/html/maginon/ipc-100ac-aus/ipc-100ac-aus_instruction-manual_3526955032.webp)
30
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: IPC-100 AC
PRODUCT CODE: 91838
12/2014
6. The program Maginon IPCam Config
Below we have provided a detailed description of the program
Maginon IPCam Config
, as installed in section 5.3.,
Software
Installation
.
Ensure that the IP Security Camera is connected to the router via the network cable and is connected to the mains (see section
5.1.,
Hardware Installation
). A network connection between the computer and the router must also exist. Open the program
Maginon IPCam Config.
In the program select ”
Start search
“, to open a list of available IP Security Cameras.
From the list select the IP Security Camera to be set up or called up. This is also necessary if only one camera exists.
After selecting the function “
Address
“ the network
data are displayed for the selected IP Security
Camera.
The network setup for the camera is completed
automatically provided that the option ”
Use
DHCP
“ has been activated, the router supports
DHCP and is also activated . If an address different
to 0.0.0.0 appears under address, the automatic
network setup of the IP Security Camera has been
completed successfully.
To change the internal
Port
used by the IP Security
Camera, enter the new port number. When using
port forwarding, the external and internal port of
the IP Security Camera should be the same.
You can, however, also manually specify the network data if the automatic configuration is not functioning. First deactivate
“
Use DHCP
“. This opens the input fields for Static Configuration.
Under
Static Configuration
enter the network data for the IP Security Camera. These data are generally obtained via the