![background image](http://html1.mh-extra.com/html/maginon/ipc-100ac-aus/ipc-100ac-aus_instruction-manual_3526955023.webp)
21
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: IPC-100 AC
PRODUCT CODE: 91838
12/2014
Enter the shown public IP address in the browser of a device that is
not
connected to the internet via your home network.
Activation from the same network is generally not possible.
If the log on page of your IP Security Camera opens automatically, access for the IP Security Camera has been set up
automatically in the router. You can then continue the installation with section 5.7.,
Set up Domain name
.
Where automatic set up via the UPnP function is not possible, the respective access must be set up manually. This is referred to
as
Port forwarding
. During this process, a single access is directly passed on to the IP Security Camera.
The below example shows the settings to be selected in the router to set up such an access. As the settings of the router
can differ considerably, a general description cannot be provided at this point. Please check in the router documents how
individual devices can access the router. This information can generally be found under “Port Forwarding“.
We also have provided more detailed descriptions for different router models of how to set up Port forwarding. These
descriptions can be found on internet page:
http://www.ipc-info.com.
If your router is not listed, please contact our Service Hotline.
First start the configuration program of your router. For this you require the local network address of your router. You can
check the local network connection by searching for the IP Security Camera in the program
Maginon IPCam Config
and then
displaying the network settings using option “Address“. Note down the address listed as „Standard gateway”.
Further information for activating the router can also be found in the Operating Instructions of your router.
For this, enter the local network address of your router in the browser and open the configuration menu. Next, open the Port
forwarding menus in the Configuration menu.