MAGINON AC-500, Инструкция по эксплуатации

Страница: 12 / 28

10
Now insert the camera, lens first, into
the underwater protective housing. In
doing so, the positions of the on/off
button and the shutter button on the
camera and housing must be aligned.
Close the underwater protective
housing and squeeze the cover and
housing together firmly. Hook the
latch on the side into the bracket on
the cover. Then lock the latch by
pressing the clip marked with an
arrow forwards against the housing.
In order to open the underwater
protective housing again after use,
pull on the clip marked with an
arrow until it springs open. You can
then completely open the housing
and remove the camera. Always dry
the underwater protective housing
before opening it in order to avoid
getting moisture on the camcorder.
Note:
• The underwater protective housing also provides protection from rain or water spray, for example when
the Action Camcorder is mounted on a helmet. However, please note that the sound quality is reduced on
recordings made while using the underwater protective housing.
• After use in salt-water, thoroughly wash the underwater protective housing using clean water. Otherwise
the hinge could corrode and salt could stick to the seal ring, which can lead to damage to the seal.
• The seal ring can be removed and washed separately using clean water. Do not dry the seal ring with a cloth
as this could cause damage.