Magikitch'n MKE SERIES, Руководство по установке и эксплуатации

Страница: 4 / 24

Installation
MKE Series Electric Griddle
L20-369 REV. 2 (05/12) 4
Location Combustible Construction
Inches (Centimeters)
Non-Combustible Construction
Inches (Centimeters)
Cabinet Back 8.0 (20.4) 8.0 (20.4)
Cabinet Sides 2.0 (5.0) 0.0 (0.0)
1. Installation Section
1.1. Checking Your New Griddle
Your new griddle has been carefully packed into one crate. Every effort has been made to ensure that
your new griddle is delivered to you in perfect condition. As you unpack your new appliance, inspect each
of the pieces for damage. If something is damaged, Contact the shipper immediately; the shipper is only
responsible for 15 days after delivery. Check the packing list enclosed with your griddle to ensure that you
have received all the parts to the griddle. If you are missing any parts, contact the dealer from whom the
griddle was purchased.
In the provided spaces on the cover of this manual, fill in the Model No., Serial No., and the date the
appliance was purchased. The Information is located on the data plate on the inside cabinet wall, see
Figure 1 below. Keep this information in a safe place so it can be referred to in the future.
1.2. Installation Clearances
Your new MagiKitch’n Griddle needs clearance around it for proper operation. Adequate clearances allow
for servicing. The clearances shown below are for installation in combustible and non-combustible
construction. Ensure that all clearances stated on the data plate and in the clearance section of this
manual are strictly followed.
Table 1
Figure 1