Page 10
2.2 Battery Replacement (Remote Control and
Total Control
Handset
1. On the reverse of the handset remove
the battery cover by pressing down at
the top of the cover and sliding down.
2. Remove and unclip the old battery and
replace with a new PP3 9V battery.
3. Replace
the
cover.
Press here and
slide down
Figure 12
Receiver Unit
1. Remove the receiver unit from under the
fire burner (or from wherever positioned
if mounted remotely) and remove the
battery compartment cover (see
Figure
13
).
2. Replace the old batteries with new ones,
ensuring they are inserted in the correct
polarity.
3. Replace the cover on the receiver unit,
ensuring that it is securely closed.
4. Return the receiver unit to its original
mounting position.
Figure 13
CAUTION: With the exception of battery replacement, the battery holder must be
located within the heat shield at all times.
