dips remain after treatment and the placement of multiple bass
sources, then they will most likely remain unfixable.
Here we show the results (20-291Hz) when the main speakers are
added and frequency response is further smoothed from overlapping
of the main speakers and the Sub. The left red corner positioning
(yellow) is still the best. This position is both smoother overall and
the dip the once existed at 100 Hz for the subwoofer alone has been
eliminated by the main speakers.
You are finished positioning your Subwoofer.
6. remove the casters and apply the feet.
apply the brakes on both casters which have them. While two people
lift up the side of the speaker without the brakes, a third person
unscrew the casters and replace them one at time with the feet.
carefully lower the subwoofer to the ground and repeat the process
by tilting the subwoofer in the opposite direction and screwing in the
remaining two feet. Be very careful to have ample help the hold the
speaker safely while this process is performed.
7. Determine the level of the QSub
Before applying any EQ or crossover, make a final measurement of
the QSub and both main speaker. Make sure the measurement is done
in minimum 85 dB level so it will represent normal listening level.
!
of
!
7
21
Содержание S-Sub
Страница 12: ...In Room common target limits of 12 21...
