MAGICO S-Sub, Руководство по установке

Страница: 20 / 21

Save Preset
To save a single preset- select an empty preset slot from the drop
down menu; and enter the name you wish to call your preset in the
name location (
where it says “Default Preset” ). Then press the
“ Store” button that is underneath the preset drop down. Not the
store Button above the drop down menu- This “Store” button will
store all of your presets you made. You should use this Back up
“Store” button after you have made all the presets you would like
during your Q-sub setup session or any future session. This will
allow you to create a back-up file to recover your presets from.
When setting a preset in an empty slot it is good to know that, the
preset in that location will be overwritten. This action cannot be
undone but you can edit and store over your preset if you need to
make changes. Now your preset is saved in the selected location. The
presets contain all filter, dynamics, gain settings etc; in other words
everything that makes out a loudspeaker configuration. Presets do
NOT contain the name of the unit, network configuration, automatic
standby delay, user access rights and passwords.
!
! !
!
Load Preset
The preset is loaded and all settings are applied immediately. All
settings that were in the unit prior to loading the preset will be
erased. This action cannot be undone. So make sure to save your
setups in preset singles or large preset back-ups.
Access Level
The DSP has the option of locking away the front panel controls to
avoid tampering of settings by unauthorized persons. To lock the
unit, select "Lock Unit" from the “Hardware” drop down menu at the
top of the screen.
!
!
!
! of ! 20 21