MAGICO S-Sub, Руководство по установке

Страница: 14 / 21

available PC and MAC configuration program. With this program you
can also update your DSP to the latest firmware.
Power Connector
The Magico DSP has an internal amplifier that utilizes standard 20A
250VAC IEC cable. (C19 pin connection)
!
Power Switch
The Power Switch turns the Q-Sub15 (18) on and off.
!
Ethernet Connector
This RJ-45 connector is used to connect your product to a network.
It can then be configured and controlled in real time with the freely
available PC and MAC configuration program. With this program you
can also update your DSP to the latest firmware.
Analog inputs
The analog input section of the DSP offers two electronically
balanced XLR connectors. The input level is +23dBu max,
electronically balanced.
!
II. Getting Started
Quick Start
For those of you that wish to jump right in, the following
information has been provided to act as a quick start guide for
optimizing performance of your QSub.
!
Connections
When setting up your subwoofer, make connections as follows:
- Always make connections prior to applying power to the subwoofer.
- Connect the output(s) from the Preamp to the Ch. 1 XLR input
connector (mono) or both, Ch.1 and Ch. 2 XLR input connectors
(stereo).
!
Remote Monitoring and Control
When connecting the unit via USB, make sure to connect it directly to
your computer or to use a USB hub that supports USB1.0. If you
! of ! 14 21