![background image](http://html1.mh-extra.com/html/magicfx/sparxtar-spark-fx/sparxtar-spark-fx_user-and-installation-manual_3500540008.webp)
8 MAGICFX® SPARXTAR
—
User and Installation Manual
DMX Address
DMX Value (decimal) Result
Safety address
0
99
Device disabled
100
154
Device enabled
155
255
Device disabled
Start address
(Effect height)
0
255
Effect height (2 to 4.5 m)
Start a 1
(Effect trigger)
0
63
No output
64
127
Empty heater (only when previously
set to ‘no output’ and after a delay of
10 seconds)
128
255
Output effect at set height
Operation of the DMX addresses
NOTICE
The maximum continuous duration of the effect is 40 seconds.
After this period the effect will stop automatically. To start the
effect again you must disable and re-enable the Effect trigger.
NOTICE
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.
1.7
DISPLAY PANEL
MAIN MENU
DMX/RDM SETTINGS
BACK
PREV
NEXT
SELECT
Display panel
The display panel is located on the backside of the MAGICFX
®
SPARXTAR. Check the
following menu structure for all options in the menu. Use the buttons for navigation
and selection. The left-hand LED blinks red when DMX is active. The right-hand LED
continuously lights red when an error is present.
Содержание SPARXTAR SPARK FX
Страница 1: ...SPARXTAR SPARK FX PART01213 rev 01 01 USER AND INSTALLATION MANUAL ENGLISH...
Страница 27: ......
Страница 28: ...WWW MAGICFX EU...