Magicfx FLAMEBLAZER Скачать руководство пользователя страница 13

Страница: 13 / 36

MAGICFX FLAMEBLAZER

—

User and Installation Manual

Menu function

Explanation

Lock/Unlock

Controller

Holding the Lock button for more than 5 seconds will “lock” the

display functions. Meaning buttons will not respond. This to avoid

accidental change of parameters via display. To unlock, hold

the Unlock button for more than 5 seconds. In case system is

armed display is locked.

Reset Errors

In case there is a locking error present, this button will reset the

appliance. If the fault does not persist, the locking error will not

reappear.

DMX Start

Address (1-512)

Setting the DMX start address.

DMX Enable

Address (1-512)

Setting the DMX Enable Address.

DMX Footprint

This parameter indicates the DMX footprint, in other words the

amount of sequential channels used by the appliance. This does

not include the enable channel.

DMX input

(XLR/ARM)

Make sure that the DMX/RDM settings on your machine match

your wiring setup. If the DMX signal runs separately over 5-pole

XLR cables, make sure that XLR is selected. If a combined DMX

and ARM signal runs over the ARM data (EtherCON) cables,

make sure that ARM is selected.

RDM (On/Off)

Use this function to turn on/off the RDM functionality.

Pyro Input

Control (On/Off)

Use this function to toggle between the control modes DMX and

Pyro

Display Dimmer

(On/Off)

Turn display dimmer on or off. If turned on, the display is dimmed

automatically 30 seconds after the last button push.

Factory Defaults

(Yes/No)

Restores the appliance factory default settings.

Type

(Alarm/Error)

Toggle between the occurred locking error (Alarm) list, and

blocking error (Error) list. Locking errors need intervention by

user, although they are “auto-reset” 3 times before the appliance

remains in error until reset by user. Blocking errors clear when the

triggering fault disappears. 16 locked, and 16 blocked errors are

logged. Top of the list shows the last occurring error.

Serial Number

(DDDDD)

Appliance serial number as also printed on the appliance label.

Unique ID

(HHHHHHHHHHHH)

UID number as the appliance appears in the RDM device list

after running discovery.

Software Version Installed software version.
Software CRC

CRC of the functional software.

Bootloader CRC

CRC of the bootloader software.

Build Date

Release date of functional software.

Uptime

(DDDD:HH:MM:SS)

Time counter which indicates how long the appliance has been

powered in total.

Effect Time

(DDDD:HH:MM:SS)

Time counter which indicates how long the effect has been on in

total.

Menu functions

Содержание FLAMEBLAZER





































Результаты поиска

Содержание FLAMEBLAZER

Отзывы:

Похожие инструкции для FLAMEBLAZER

Бренды по названию

Популярные бренды

Magicfx FLAMEBLAZER, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание FLAMEBLAZER

Отзывы:

Похожие инструкции для FLAMEBLAZER

Бренды по названию

Популярные бренды