Magicard MAGICARD Sicura Laminator, Быстрый старт

Страница: 21 / 24

Ultra Electronics Card Systems Quick Start Guide
MAGICARD Sicura Laminator Page 21
Check the Installation:
•
Repeat the installation steps in this guide.
•
Check that the laminator mains voltage is correct.
•
Check that the laminating film is the right way round and passes through the
optical sensor.
•
Check that the unit has warmed up (3 minutes).
•
Check that the rollers are clean.
•
Check the status of the Error LEDs (section K).
For further assistance:
•
There are a number of useful Technical Bulletins on the MAGICARD WEB page at
http://www.ultramagicard.com . If you do not have WEB access, copies can be
requested from Customer Service.
•
Call your local Dealer, giving the Model Number and Serial Number, a description
of the nature of the problem, and the flashing error codes if pressent.
•
Call the Ultra Magicard Customer Service Hotline number - +44(0)1305 762115 or
+44(0)11305 762121.
•
Email us at: customer_service@ultramagicard.com .
M
In Case of Difficulty