Magicar m110as bruger, Руководство пользователя

Страница: 18 / 23

Two-Way Remote User’s Guide
36
Knocking (For door open or entering the password.)
Two-Way Remote User’s Guide
35
The password should be entered under the,
(see page 28).
After the first set
The second, third, and fourth password numbers should be entered the same as
above.
(As the password has four numbers.)
After entering the final set
The parking lights will flash, signaling that the password has been entered.
Unlocking the doors using the RPS
To unlock the doors using the RPS, the code must be entered correctly, matching
the code you specified initially. The remote will be paged and will show that the
doors have been unlocked.
The Green LED will flash at the first knock.
After 1.5 sec
The next knock shall be done within 1.5 sec.
Red LED flashes as many times as the
number of the first set of knocks.
Push the
Button or
Knock on the
RPS sensor 10 times
Push the
Button or
Knock as many times as the first password number, and then
check to see if the red LED flashes.
(Knock as many times as the first password number)
Red LED flashes fast Red LED flashes fast
Green LED will flash at the first knock.
In Range Display Method
If the remote and vehicle are within operating range of each other, the signal
strength will be displayed beside the antenna icon on the display.
Set-up and Other Functions
Flashes 5 times
When the battery is almost dead and ready to be replaced, the battery icon will flash
and Battery Save Mode will operate.
Battery Save Mode Operation
The remote will only receive confirmation signals for button I operations.
The other buttons will still function, but they will not receive confirmation signals
back from the vehicle.
The transmitting power will be reduced for a close range operation only.
Flashes 5 times
Battery Save Function