Magic Frontier V4, Руководство пользователя

Страница: 17 / 48

Form 07D –Frontier V4 Owner’s Manual ENGLISH.docx Revision No.2
© Magic Mobility Page 17 of 48
WARNING! Fasten the positioning belt when using the seat elevator
WARNING! Never elevate the seat from its lowest position on an inclined surface
WARNING! Never raise the seat when crossing bumpy or uneven surfaces
WARNING! Do not put the power wheelchair into freewheel mode with the seat
elevated
WARNING! Maintain recommended tyre pressures for good stability
STOP! Do not put your fingers, toes or any other body part or object into the scissor
mechanism while it is operating. Serious personal injury will occur.
5.7 Slope Sensor (Inclinometer) – if fitted
The slope sensor option enables the chair to be aware of its backrest angle relative to the horizon. This
includes the accumulation of
backrest recline, seating tilt
and
ground incline
put together. The slope
sensor uses this information to minimise the chance of the chair becoming unstable through body
weight being too far back.
Backrest Angle Inhibits
The inhibit/s depending upon the backrest angle are as follows:
Backrest Angle Resulting Inhibit
0° - 30° None
31° - 50°

Lift Inhibit
> 51°

Lift Up Inhibit
 Tilt Back Inhibit

Recline Back Inhibit
 Drive Inhibit
Seat Raise Inhibits
A further inhibit may be activated depending upon the
height of seat lift
. When lifted above a certain
height, your LCD Joystick Module will display an orange turtle or your LED Joystick Module’s speed
indicator lights will flash. This indicates that due to the seat elevation, the chair will experience the
following inhibits:

Speed Limiting

Tilt Back Inhibit

Recline Back Inhibit
Trouble shooting
If your chair has a slope sensor and a function does not seem to be operating

Drive the lift function downwards until it stops in the home position;

Drive the tilt function forwards until it stops in the home position;

Drive the recline function forwards until it stops in the home position;

If your chair is still inhibited, refer to the Common Troubleshooting section and follow
instructions for your particular Joystick Module.