Magic Frontier V4, Руководство пользователя

Страница: 16 / 48

Form 07D –Frontier V4 Owner’s Manual ENGLISH.docx Revision No.2
© Magic Mobility Page 16 of 48
WARNING! Do not use your chair in freewheel mode or attempt to place your chair
into freewheel mode without an attendant present. You may cause injury to yourself
and to others. Do not place your power chair in freewheel mode while on an incline.
The chair could roll uncontrollably on its own, leading to injury to yourself and
others.
WARNING!
THERE IS NO BRAKING ON THIS WHEELCHAIR WHEN IT IS IN FREEWHEEL MODE.
5.4 Electrical Safety Protection
Your wheelchair has a fuse fitted into the battery circuit to protect the motors and electronics from
an accidental current overload. In the case of a blown fuse, the chair will not drive and you will need
to contact your Magic Mobility dealer for repair / replacement
5.5 Seat Tilt Option – if fitted
To operate the seat tilt:

Bring your power chair to a complete stop on a flat level surface.

Always fasten the positioning belt when operating the seat tilt option.
 Push the ‘Mode” button on the joystick. Select seat tilt by moving the joystick left or right. Once
the seat tilt option is highlighted, moving the joystick forward or backwards will operate the
function.

Once the seat reaches its highest tilt angle, the tilt action stops; release the joystick at this point.

Before driving, return the seat to its upright position. When returning to the upright position,
always be sure that the mechanism has reached its lowest limit or normal seated position.
WARNING! Never tilt the seat from its upright position on an inclined surface or on
bumpy or uneven surfaces. Never raise the seat tilt while your power chair is in
freewheel mode. Failure to heed this warning can result in the power chair tipping
over and causing personal injury.
CRITICAL! Do not put your fingers, toes or any objects into the tilt mechanism while
it is operating. Serious personal injury will occur.
5.6 Power elevating seat option – if fitted
The power elevating seat will allow more freedom and independence by extending your level of reach.
The seat height can be adjusted to match a surface to which you are transferring.
The scissor action of the seat elevator may be a dangerous hazard. Under no circumstances should
you put your hands, fingers, toes or any part of your body in the seat elevator mechanism while it is
operating. Ensure that no one in the vicinity of the wheelchair has any part of their body in the seat
elevator mechanism while it is working.
To operate the power elevating seat:

Bring your power chair to a complete stop on a flat level surface.

Always fasten the positioning belt when operating the power elevating seat.

Push the ‘Accessory Mode Selection’ button on the joystick. Select power elevating seat by
moving the joystick left or right. Once the power elevating seat option is highlighted, moving the
joystick forward or backwards will operate the function.
 Once the seat reaches its highest elevation, the action stops; release the joystick at this point.

Before driving, always be sure that the mechanism has returned the seat to its lowest position.
The power seat elevator is fitted with a system that reduces the speed of the power wheelchair when
the seat has been elevated approximately 2”/50mm.