9.2- Packing in MAGIC VAC
®
Family canisters
Multi-use canisters, ideal for storing products that are used frequently like dry and fragile foods; powdered
foods; fruits and vegetables, fresh as well as blended or pureed; due to their transparency and design, they
are attractive on kitchen shelves and guarantee excellent visibility of their contents.
- Fill the Canister leaving a space of at least 3 cm from the upper rim of the canister and place the lid on the
canister.
- Using the
Canister Tube
(13), connect the canister lid to the air intake
ACCESSORY PORT
(4) on the
machine (fig. O e P).
- Close the
Cover
(4) and press it with your hands to engage the
Engage buttons
(1) (Fig. H)
- Press the
canister
button (2D), the machine will perform the vacuum in the canister and will shut itself off
once the operation is complete.
- Detach the
Canister Tube
(13) from the canister lid.
- To open the canisters, press the centre button (17) and open the valve (17) based on the model used (see
canister instructions).
9.3- Packing in glass jars sealed with metal lids (Leifheit type)
In order to perform the packing cycled in jars sealed with metal lids, you must use the
MAGIC VAC
®
Lid
Attachment
(optional).
Proceed as follows:
a)
Fill the jar leaving a space of at least 3 cm from the upper rim of the jar.
b)
Using the
Canister Tube
(13), connect the
Lid Attachment
(18) (fig. Q) to the
ACCESSORY PORT
(3) on
the machine. Place the
Lid Attachment
(18) (fig. Q), directly on the jar with only the
Leifheit type Lid
(19) and push it down, ensuring that it is correctly inserted.
c)
Close the
Cover
(4) and press it with your hands to engage the
Engage buttons
(1) (Fig. H)
d)
Press the
Canister button
(2D); the machine will perform the vacuum cycle automatically and will shut
off when the operation is complete. In any event, the pump turns itself off automatically after about 5
minutes.
e)
Detach the
Tube
from both the
Lid Attachment
and the
ACCESSORY PORT
(3) on the machine.
f)
Apply and securely screw on the
Ring
(20) supplied with the
Lid (19). (fig. Q1).
fig. R
fig. Q1
20
To open a vacuum-packed glass jar sealed with a metal lid, use the
proper
Lid Opener
(ACO1055) with the written side up. After having
unscrewed the Ring (20), place the
Lid Opener
as shown in figure R and
delicately apply pressure without bending the Lid until the vacuum
seal is released. Then remove the metal Lid. This accessory allows the
Lid to be re-used.
19
d) Press the
“canister
” button (2D); the machine will perform the vacuum cycle
automatically and will shut off when the operation is complete. In any event, the pump turns itself
off automatically after about 5 minutes.
e) Detach the
Canister Tube
(13) from both the Canister Knob as well as the
ACCESSORY PORT
(3) on the
machine.
f) Turn the Canister Lid knob to the “CLOSED” position.
To open the canisters, turn the Lid Knob to the “OPEN” position; you should hear the air whistle as it
re-enters the canister. This sound is your guarantee that the contents were vacuum-packed.
17
18
