Magic Mobility Frontier V6 Скачать руководство пользователя страница 42

Страница: 42 / 65

Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx

Revision No.4

Page 42 of 65



Check the motor brakes are not dis-engaged (see the ‘Free Wheel’ section of your Power
Wheelchair Owner’s Manual)

Motor Error - This occurs when the CJSM2 detects that a motor has become disconnected



Check the motors, cables and connections to the CJSM2

Inhibit Active - This occurs when any of the inhibit inputs are active and in a latched state.



Cycle the power. This will drop out of latched mode and might clear the trip.



Check all wiring and switches connected to the inhibits

Gone to Sleep - This occurs when the CJSM2 has been left inactive for a time greater than set in

sleep timer

Charging - This occurs when the CJSM2 detects that a charger is connected to either inhibit 1 or

inhibit 3. The battery charging screen will be displayed during charger connection.



Disconnect the charger from the wheelchair

Bad Cable - This occurs when the CJSM2 detects a fault in the wiring between any of the modules



Check all cables and connections for continuity and any possible pinch points



If there is any visible damage to cables, contact your service agent to replace.

6.12

Locking the Control System

The Control System can be locked by either using a button sequence on the keypad or with a

physical Key. This will be set up at the factory.

Keypad Locking:

While the control system is switched on, depress and hold the On/Off button.

After 1 second the control system will beep. Now release the On/Off button

Deflect the joystick forwards until the control system beeps.

Deflect the joystick in reverse until the control system beeps.

Release the joystick, there will be a long beep.

The wheelchair is now locked.

The following screen will be displayed, the next time the Control System is switched on.

To unlock the wheelchair:

If the control system has switched off, press the On/Off button.

Deflect the joystick forwards until the control system beeps.

Deflect the joystick in reverse until the control system beeps.

Release the joystick, there will be a long beep.

The wheelchair is now unlocked.

Key Locking:

With the Control System switched on, insert and remove a PGDT supplied key into the Charger

Socket on the Joystick Module. A short beep will be heard.

The wheelchair is now locked.

The following screen will be displayed, the next time the Control System is switched on.

Содержание Frontier V6


































































Результаты поиска

Содержание Frontier V6

Отзывы:

Похожие инструкции для Frontier V6

Бренды по названию

Популярные бренды

Magic Mobility Frontier V6, Руководство пользователя

Результаты поиска

Содержание Frontier V6

Отзывы:

Похожие инструкции для Frontier V6

Бренды по названию

Популярные бренды