Form 07A –Frontier V6, V4 and Extreme X8 Owner’s Manual ENGLISH.docx
Revision No.4
© Magic Mobility
Page 29 of 65
6.8.2
LCD Screen Control System Indication
The colour LCD screen is split into 3 areas of information:
Top Bar
Battery Indicator: Displays the charge available in the battery and
indicates the battery’s status. See ’Batteries & Charging’ for further
information
Focus symbol: When multiple controllers are installed, the one currently
in control of your power chair will display this symbol
Base Bar
Current Profile: The currently selected Profile is shown in numeric form.
Motor Temperature: This symbol means your control system has reduced
power to the motors to protect them against heat damage.
Control System Temperature: This symbol means your control system
has reduced its own power to protect itself against heat damage.
Main Screen Area
Drive Screen
Profile Name: This displays the name of the currently selected profile.
Clock: This displays the current time digitally. The clock is user adjustable.
Refer to Settings Menu section (below) for details.
Speed Display: This gives a proportional display of the wheelchairs speed.
Maximum Speed Indicator: Displays the current maximum speed setting.
Digital Speed Display: Displays your power chair’s actual speed.
Inhibit: If the speed of the wheelchair is being limited (for example, by a
raised seat), this orange symbol will be displayed.
If the wheelchair is being inhibited from driving (for example, by using
transfer tilt), this red symbol will be flashing.
Mode Screen
Actuator Mode: Displays the sections of the chair currently selected for
movement.
Bluetooth Mode: When Bluetooth Mode is entered the following screen
will be displayed.
