Magic Mobility Extreme X8 with G90, Руководство пользователя

Страница: 15 / 40

Page 15
seat option is highlighted (as shown to the right), moving the joystick forward or backwards
will operate the function.

Once the seat reaches its highest elevation, the action stops; release the joystick at this
point.

Before driving, always be sure that the mechanism has returned the seat to its lowest
position.
The power seat elevator is fitted with a system that reduces the speed of the power wheelchair
when the seat has been elevated approximately 50mm.
WARNING! Fasten the positioning belt when using the seat elevator
WARNING! Never elevate the seat from its lowest position on an inclined
surface
WARNING! Never raise the seat when crossing bumpy or uneven surfaces
WARNING! Do not put the power wheelchair into freewheel mode with the seat
elevated
WARNING! Maintain recommended tyre pressures for good stability
STOP! Do not put your fingers, toes or any other body part or object into the
scissor mechanism while it is operating. Serious personal injury will occur.
5.8 Steering lock option - if fitted
The purpose of the steering lock is to provide greater straight-line directional stability. This is
particularly useful when reversing the wheelchair down-ramps out of a vehicle. This is achieved
by locking the steering tie-rod and is engaged by the chair operator via the joystick

Bring your power chair to a complete stop on a flat level surface.

Push the ‘Accessory Mode Selection’ button on the DX2 joystick. Select the
Steering lock option by moving the joystick left or right. Once the Steering
lock option is highlighted (as shown to the right), moving the joystick forward
or backwards will operate the function.

Once the steering lock is engaged; release the joystick at this point.

Before driving normally, ensure that you have disengaged the steering lock with the joystick
WARNING! When the steering lock is engaged, only drive the wheelchair
forwards and backwards. Attempting to drive the wheelchair normally with the
steering lock engaged could cause serious damage.
5.9 ANSI/RESNA WC/Vol 1
– Section 19 and ISO7176-19 restraint system; if fitted.
This wheelchair conforms with the requirements of ANRI/RESNA WC/19 and ISO7176-19.
Magic Mobility recommends that wheelchair users are NOT transported in vehicles of any kind
while in wheelchairs. The Department of Transportation has not approved any tie-down system
for transportation of a user while in a wheelchair in a moving vehicle of any type. It is Magic
Mobility’s position that users of wheelchairs should be transferred into appropriate seating in
vehicles for transportation and use be made of the restraints made available by the auto
industry.
For detailed information see
Appendix A - ANSI/RESNA WC/Vol 1
– Section 19 and
ISO7176-19 restraint system; if fitted.