SERVICE INFORMATION
30
PROBLEM
POSSIBLE CAUSES
SUGGESTED CORRECTIONS
Baking results not
satisfactory
·
food takes too long or
cooks too fast
·
pale browning
·
food over-done on outside
and under-done in center
·
over browning
a. oven not preheated
b. incorrect rack position
c. incorrect use of aluminum foil
d. oven bottom incorrectly replaced
e. door incorrectly replaced
a. preheat oven 8 to 15 minutes
b. see page 25
c. see page 13
d. replace oven bottom correctly
e. see page 26
See Problem Chart on page 14
See baking tips on page 13
Oven smokes excessively
during a broil operation
a. move broiler pan down one rack
position.
b. trim fat.
c. apply sauce during last few minutes
of cooking. If meat has been
marinated, drain thoroughly before
cooking.
d. always clean broiler pan and insert
after each use.
e. never cover insert with foil as this
prevents fat from draining to pan be-
low.
a. food too close to burner
b. meat has too much fat
c. sauce applied too early or marinade
not completely drained
d. soiled broiler pan
e. broiler insert covered with aluminum
foil
This is called a FAULT CODE. If a fault code appears in the display and beeps sound, press
CANCEL pad. If the fault code and beeps continue, disconnect power to the appliance and
call an authorized servicer.
If the oven is heavily soiled, excessive flare-ups may result in a fault code during a clean
cycle. Press CANCEL pad and allow oven to cool for one hour then reset the clean cycle.
“F” plus a number
appears in display.
Strong odor or light smoke
when oven is turned on the first
few times.
a. This is normal for a new range and
will disappear after a few uses. A
clean cycle will speed up the
process. Opening a window or
turning on a fan will help remove
the smoke and odor. A clean cycle
will speed up the process.
b. Use self-clean feature.
a. “Burning off” of manufacturing oils,
lubricants used during the
manufacturing process, or
insulation.
b. Food soil.
OVEN TEMPERATURE ADJUSTMENT
For example:
If the oven temperature was reduced by
15
°
, the display will show - 15
°
.
1. Press BAKE pad.
2. Press
Y
pad until 550
°
is
displayed.
3. Press and hold BAKE pad
until 0
°
appears in display.
4. Press and hold the
Y
or
B
pad to select the
temperature change
you wish.
You can adjust the oven temperature if you feel the
temperature is too hot or too cool.
To adjust the oven temperature:
S
The oven temperature can be increased or
decreased by 5
°
to 35
°
.
S
If the oven temperature was previously adjusted,
the change will be displayed.
B
Y
then
Bake
B
Y
then
Bake
It is not necessary to readjust the oven temperature if
there is a power failure or interruption. Broiling and
cleaning temperatures cannot be adjusted.
TROUBLESHOOTING CHART
