Basic operation
Resilience D Installation guide. © 2016, all rights reserved
P a g e
|
21
BASIC OPERATION
The natural chlorine generator produces a pure form of chlorine to sanitize and oxidize the pool water. The chlorine
residual needs to be maintained at 1 to 3 ppm. This may be tested using a standard kit or by your local pool store. To
obtain the optimal residual buildup of chlorine, the best time to run your filter is in the early morning and after 4pm
when there is less UV to destroy the chlorine produced, leaving chlorine in the pool to oxidize the unwanted foreign
matter.
Modes:
ON
– the system is ON and the circulation pump is on – the system is fully operational and produces chlorine.
OFF
– the unit is OFF by manual shut down of the controller using the button. All system functions are off.
WARNING
: the controller still receives power from the line.
ST:BY
– The unit is in STAND-BY mode: it is waiting for the circulation pump to turn on before producing chlorine if
the unit if off because the circulation pump if off, the OFF indication appears in the numerical display.
AUTO –
Automatic control pH/ORP.
1.
Chlorine output display
5.
Mode button
2.
Salinity bar
6.
Turbo button
3.
Special icons
7.
ON/OFF
4.
Up/Down buttons
8.
Numerical display
