Magellan eXplorist 210, Справочное руководство

Страница: 52 / 98

Routes 49
When a route is created it can have many different legs to the route, each leg with its own destination. If
during your travels you wanted to skip some of the legs you can select the leg that you want to proceed to next.
An example would be your planned route starts at your campsite. The first leg goes to the bridge. The second
leg goes across the bridge to the stone marker. Leg 3 leaves the stone marker and takes you to the ranger
station. To finish out the route, the final leg goes from the ranger station to the swimming area. This route
would be
Camp > Bridge > Marker > Ranger > Swim. Suppose that after crossing the bridge you didn’t want
to go to the stone marker but instead go directly to the ranger station. Since the route is active (you can only
select legs from active routes), you would follow the instructions below and tell the eXplorist to set the next leg
to the ranger station. The route would be recomputed, eliminating the navigation instructions to go to the
stone marker.
1. Press MENU .
2. Use the Arrow joystick to highlight
Routes
.
3. Press ENTER .
4. Locate the file that contains the route you want to activate or deactivate.
(The eXplorist will automatically open the default file.)
5. With the file highlighted press ENTER .
6. Highlight the name of the route. (Activated routes will be bolded in the
list.)
7. Press ENTER .
8. Highlight
Select Leg
.
9. Press ENTER .
10. Use the Arrow joystick to highlight the next destination POI from the
route list that you want to go to. In the example to the right, that would
be Ranger.
11. Press ENTER .
12. Confirm that you want to do this by using the Arrow joystick to highlight
Yes
.
13. Press ENTER .
14. Press NAV to return to the last viewed navigation screen.
Changing the Destination Leg of an Active Route
Route leg list with
‘Ranger’ selected. Note
that ‘Marker’ is
bold as it
is the current active leg.